after heat的例句大全

Objective To study the truth of first aid in spot after heat burning.

目的:了解儿童热力烧伤后现场急救措施的真实情况.

互联网摘选

The temperature of phase transition in thin film after heat cycle is changed.

薄膜经热循环后,其相变温度也发生变化.

互联网摘选

The paper detailedly discusses light fractions are separated from C _ 5 raw mateTia 1 after heat polymerizing.

论述了C_ 5原料油经热聚、分离出来的轻组分经催化聚合工艺制得浅色C_5石油树脂.

互联网摘选

Seat and back wood: Multi-layer plywood after heat treatment, with painting finished.

座、背外壳: 采用优质多层旋切木皮经模具热压成型,面压实木皮, 油漆工艺装饰.

互联网摘选

The sizing process must be taken in order to eliminate the size tolerance and roundness one after the seamless pipe rolled and heat treated.

为消除无缝钢管的轧制和热处理所产生的尺寸和椭圆度误差等缺陷，一般要采用定径工艺。

互联网摘选

The basic requirement of welding the steel 2205 is that the weld metal and heat-affected zone obtain a favorable phase balance and retain the performance as the base metal after welding.

平衡铁素体和奥氏体两相组织在焊缝金属和热影响区中的比例，保证焊接接头的性能，是双相不锈钢焊接的基本要求。

互联网摘选

HML was sensitive to heat, and the agglutinating activity declined obviously after being heated 10 minutes under 50 ℃.

HML对热较敏感，经50℃处理10min，凝集活性下降明显，但对酸碱具有一定的稳定性，在pH5.0~8.0范围内较稳定。

互联网摘选

After heat treating, the thin copper sheet whit different crystal size is got.

经过热处理后，得到了不同晶粒大小的薄铜板。

互联网摘选

After the sauce is thick, remove the pan from the heat.

当果酱变稠时, 移开锅不再加热.

超越目标英语 第3册

The best composite was the one after backward extrusion and heat treatment.

其中力学性能最好的为反挤压后经过热处理的TiB2/Al-Si-Mg-Cu复合材料。

互联网摘选

Therefore, it is necessary to reasonably decreasing the cool rate after welding process for improving the ability of anti-fatigue crack initiation in the weld heat affected zone. 5.

因此在焊接时适当地降低热影响区的冷却速度，可以使焊接热影响区获得更优的抗疲劳裂纹萌生能力。

互联网摘选

The curve of heat release rate and mass loss rate had the same shape which showed that irradiation cross-linking had the effect in the condense phase. The char formed after cone calorimetric test had the wrinkle structure to wrap the melt drops.

锥形量热仪测试的热释放速率和质量损失速率曲线轮廓类似，也说明了辐照交联在凝聚相起到的作用；燃烧后炭层呈褶皱状结构，有利于对熔滴的包覆。

互联网摘选

Using infrared spectrum of heat stabilizers mechanism research shows that, after joining stabilizer, PVC crystallinity, stability.

采用红外光谱对热稳定剂机理研究表明, 加入稳定剂后, PVC结晶度下降, 稳定性提高.

互联网摘选

After the heat-sensitive mechanical plastic film and paper the drag-and-shoot, or longitudinal central side the fold.

经过热压合机械的塑料薄膜和纸张在拖梢部位出现纵向, 或者中心向外两边的皱折.

互联网摘选

This study is designed to test the effect of heat shock response on rat heart after an acute bout exercise.

目的：探讨热休克反应对急性运动大鼠心肌自由基代谢的影响。

互联网摘选

After the fabrication of the U type tubular mode heat exchanger core is completed, the shell side hydro-test shall be performed in order to protect the joints of the tube and the tube from leakage.

U型管式换热器芯子制作后应进行壳程水压试验，以确保管接头及管不泄漏。

互联网摘选

For painting and baking varnish; good heat resistance, No glue remaining after tearing.

喷漆、烤漆专用绿胶，耐温性良好，撕除后不残胶。

互联网摘选

This kind of material is compounded using soft fibers and suitable resin matrix and formed plate or sheet after heat compression.

这类复合材料主要利用柔软的纤维和适量树脂基体进行复合，经压制形成板材或片材使用。

互联网摘选

After heat-moisture treatment, crimp radius decreased while crimps per unit length increased significantly and three-dimensional crimp shape became obviously.

经过湿热处理后，PTT/PET并列复合短纤单位长度内的卷曲数大幅度增加，卷曲半径减小，三维卷曲形态更加明显。

互联网摘选

This paper mainly presents that constructional mid-carbon alloy steel, after bulk moulding deformation, heat treatment and cold surface deformation can raise fatigue strength of materials effectively.

本文主要介绍中碳合金结构钢经整体塑性变形、热处理后再进行表面冷变形工艺是提高材料疲劳强度的有效途径。

互联网摘选